LadderCageCage Ladders for USA, UK & Singapore
Cage Ladder USA
Cage ladders for USA, UK and Singapore — shipped with the right regional compliance docs. OSHA 1910.28, EN ISO 14122-4 and Singapore WSH docs included.
Years Manufacturing
Export Countries
Projects Delivered
Quote Response
Delivered to USA, UK & Singapore
Cage Ladder USA – Options
Regional compliance docs included, sea-freight lead times made transparent, factory-direct pricing for any destination.
USA
OSHA 1910.28 compliant cage ladders with DoC, MTC and structural calcs for US projects.
UK
BS 4211 and EN ISO 14122-4 compliant, supplied with UK-format compliance documents.
Singapore
WSH-compliant cage ladders with the Singapore regional compliance checklist included.
Cage Ladder UK & Regional Options
Cage Ladder UK – Options
The same engineered cage ladder, matched to each regional standard. HDG 85–100 μm or SS304 for chemical and marine projects.
- HDG 85–100 μm
Hot-dip galvanized to ISO 1461 for outdoor durability
- SS304 Optional
PMI-tested stainless for chemical and marine
- Regional Docs Included
OSHA / EN ISO / WSH compliance file ships with the ladder
| Specification | Value |
|---|---|
| Rung Diameter | Φ20 mm |
| Rung Spacing | 280 mm (≤300 mm) |
| Clear Width | 500 mm |
| Cage Diameter | Φ700 mm (hoops 40×5 @≤1500, straps 30×3) |
| Cage Start | 2.2 m above floor |
| Load Rating | 1.5 kN per rung |
| HDG Coating | 85–100 μm per ISO 1461 |
| Standards | OSHA 1910.28 · EN ISO 14122-4 · WSH |
Regional Compliance (OSHA / EN ISO / WSH)
Regional Compliance (OSHA / EN ISO / WSH)
Local buyers ask one question first: "Does it meet our standard?" Every order ships with the right regional compliance file.
- USA — OSHA 1910.28
DoC to OSHA 1910.28 for fixed ladder and cage
- UK — BS 4211 / EN ISO 14122-4
DoC to the relevant UK and European standard
- Singapore — WSH
Singapore regional compliance checklist included
| Region | Standard |
|---|---|
| USA | OSHA 1910.28 |
| UK | BS 4211 · EN ISO 14122-4 |
| Singapore | WSH (Workplace Safety & Health) |
Factory-Direct Pricing vs Local Dealers
Factory-Direct Pricing vs Local Dealers
Local dealers and distributors typically mark up cage ladders 2–3x. Buy factory-direct and pay for the ladder, not the middleman markup.
Factory-Direct Price
Quoted from the production floor — no distributor markup on any region.
Transparent Sea Freight
Delivered cost and lead time to your port, quoted up front in 24 hours.
Regional Compliance Free
OSHA / EN ISO / WSH compliance checklist with every order at no extra charge.
Get a Cage Ladder USA Quote
Get a Cage Ladder USA Quote
Tell us your target country, height, material and quantity — an engineer replies within 24 hours with pricing and the regional compliance checklist.
- Regional compliance checklist
- Factory-direct price, any destination
- Transparent sea-freight lead time
US Quick Reference
Cage Ladder to the USA — Landed Cost and Compliance Snapshot
US buyers benchmark against domestic catalog prices of $1,325–7,400 per caged ladder, then discover the import math: a 6 m hot-dip galvanized unit leaves the factory at $600–900, sea freight adds $280–550, and the OSHA 1910.28 Declaration of Conformity rides along free. The open question in 2026 is regulatory — the 24 ft cage threshold stands, the 2036-11-18 exemption runway is in place, and the September 2025 rescission proposal is still unfinalized. The table below frames a defensible budget whether you procure one replacement ladder or a multi-site program.
| Item | Figure | Note |
|---|---|---|
| US catalog benchmark | $1,325–7,400 | Domestic supplier range per caged ladder |
| Factory-direct 6 m unit | $600–900 ex-works | HDG structure at $95/m |
| Sea freight (export docs included) | $280–550 | Most major US ports; guardrail / walk-through kits ($90–250) are optional add-ons |
| OSHA status 2026 | 24 ft threshold stands | 2036-11-18 runway; 2025-09 rescission unfinalized |
| Order flexibility | MOQ 1 | Price tiers at 10 and 50+ units |
| Container planning | 20–24 units of 6 m | Per 40 ft container, mixed heights nested |
OSHA 1910.23 and 1910.28 — the Judgment Calls
Cage, Personal Fall Arrest, or Grandfathered Existing — Reading Your Ladder Under the Rule
The US fixed-ladder rule turns on three dates and one height: 24 ft of climb, November 19, 2018, and November 18, 2036. Get those right and the equipment choice makes itself.
| Your Ladder's Situation | What OSHA 1910.28 Points To |
|---|---|
| Ladder installed after Nov 19, 2018, climb over 24 ft | an LSS or PFAS is required — order the ladder as the carrier and the system as the protection; a cage may tag along as restraint |
| Existing caged ladder, erected before November 19, 2018 | cage is grandfathered until November 18, 2036 — plan the upgrade line into the capital budget now, not in the last season |
| Ladder that was compliant only with a cage before 2018 | the 2036-11-18 horizon applies to the existing cage, not to its replacement — plan the LSS line into the replacement order |
| Small trained crew, tall single climb | PFAS — a rail or cable system with harnesses; cheaper hardware, but training, fit-checks and recertification move onto your books |
| Rule status question marks | a September 2025 proposal to rescind parts of the rule was still working through the process — verify current status with your reviewer, then buy to the strictest reading; a cage satisfies either outcome |
US buying mistakes around the rule and the border
- Waiting out the proposal — compliance plans built on a rescission that may not land leave you exposed on the 2036 dates; cages satisfy every branch of the decision tree
- Ignoring the tariff line — US imports classify under the HTS steel-structures provisions and duty treatment changes with trade policy; price the landed cost at order time and keep the classification on file
- Paying catalog markup for standard builds — US catalog units ranged $1,325–7,400 in August 2026; factory-direct at $95/m with freight of $280–550 usually lands far below the low end
- Cage height measured from grade, not the climb — the 24 ft reading runs on the climb, not the building; lock the dimension at drawing sign-off
US Supply Features, Compliance Results
Five Things Factory-Direct Supply Does for a US Compliance Budget
Each row answers a pressure specific to American buyers — the rule, the catalog markup and the border.
| Feature | Advantage | Your Outcome |
|---|---|---|
| Cage starts at 2.2 m in our standard build — well below every trigger height | passive compliance with margin | the same ladder answers 1910.23 and 1910.28 reviews |
| $95/m HDG with $280–550 freight | factory-direct against $1,325–7,400 catalog range | the compliance budget buys climbs, not markup |
| DoC naming OSHA 1910.28 per unit | the declaration exists before the reviewer asks | audit responses ship with the crate |
| HTS classification documented | customs papers aligned to the product file | clearance queries answered from one folder |
| 15–25 day production, MOQ 1 | single replacements run on the same line as fleets | the 2036 upgrade program starts one ladder at a time |