LadderCageFactory-Direct Safety Ladders With Cage
Safety Ladders With Cage
Safety ladder with cage - welded steel, 300 lb rated, custom heights, docs included. OSHA 1910.28 and EN ISO 14122-4 compliant; test reports and DoC with every order.
Years Manufacturing
Countries Exported
Projects Delivered
Quote Response
Safety Ladder With Cage - Options
Safety Ladder With Cage - Options
Spec-driven safety ladders with cage - welded steel, 300 lb rated rungs and fully custom heights. Choose the build that matches your access job.
Welded Steel, 337 lb Rated
Q235B welded steel with rungs rated to 1.5 kN (approx. 300 lbs). Rung spacing at 280 mm for a comfortable, code-aligned climb.
Custom Heights
Any climb height you need - up to 25 m in a single run, and multi-run systems with rest platforms beyond that.
HDG or SS304 Finish
Hot-dip galvanized 85-100 μm per ISO 1461 for outdoor value, or PMI-tested stainless SS304 for chemical and coastal sites.
Specifications
Safety Ladder Specifications (300 lb / Custom Heights)
Every safety ladder with cage is made-to-order with the engineered parameters below.
Get My Safety Quote| Specification | Value |
|---|---|
| Rung Diameter | Φ20 mm |
| Rung Spacing | 280 mm (≤300 mm) |
| Clear Width | 500 mm |
| Cage Diameter | Φ700 mm (hoops 40×5 @≤1500, straps 30×3) |
| Cage Start | 2.2 m above floor |
| Load Rating | 1.5 kN (300 lbs) per rung |
| Materials | Q235B HDG 85–100 μm / SS304 |
| Standards | OSHA 1910.28 · EN ISO 14122-4 |
Compliance Docs: Test Reports & DoC With Every Order
Safety Ladder With Cage Compliance & Documentation
No chasing paperwork after delivery - every safety ladder with cage ships with its full compliance file.
- DoC - OSHA 1910.28 & EN ISO 14122-4
Declaration of Conformity to the relevant standard
- MTC 3.1 Material Certificate
EN 10204 3.1 for Q235B / SS304
- Test Reports & Structural Calcs
Engineer-signed for project loads
Factory-Direct Pricing & Free Spec Sheet
Factory-Direct Safety Ladder Pricing & Fast Quote
Buy direct from the factory and get a free spec sheet with your itemized quote in 24 hours. Production typically takes 15-25 working days.
Factory-Direct
No distributor markup. Quote direct from the production floor.
Free Spec Sheet
Full specifications and drawing review included with your quote.
Docs Included
Test reports, DoC, MTC & structural calcs at no extra charge.
Get a Safety Ladder With Cage Quote
Get a Safety Ladder With Cage Quote
Free spec sheet and quote in 24 hours. Tell us your height and material - an engineer replies with the compliance file scope.
- 24h itemized quote
- Free drawing review
- Test reports, DoC & calcs included
Five Inputs, Five Outputs
The Safety Ladder With Cage RFQ Checklist
The distance between a vague inquiry and a firm quote is five pieces of information. Send the left column; the right column comes back within 24 hours — complete and itemized.
| You Provide | Why We Need It | We Return in 24 h |
|---|---|---|
| Climb height | Sets piece count, splices, platform layout | Itemized price — $95/m HDG base |
| Structure type | Wall, steel or tank changes the anchor pack | Anchor drawing with bolt grid |
| Material | HDG, SS304 (1.8×) or SS316 (2.5×) | Weight sheet in kg/m and total |
| Exit style | Step-off or walk-through affects top geometry | GA drawing in DWG/DXF/PDF |
| Destination port | Drives packing and freight lines | Lead time — 15–25 days plus transit |
MOQ is one ladder and every quote carries the free drawing review — so the checklist costs you one email and returns something your engineer can mark up the same day.
Grade the Hazard, Then the Build
Safety Levels Explained — Which Tier of Protection Your Climb Owes You
A safety ladder with cage is not one product; it is a ladder of protection tiers, and the tier is set by climb height and jurisdiction before any metal is cut. Level 1 answers the 3 m question — EN ISO 14122-4 and AS 1657 bring the cage in, and our barrel starts at 2.2 m because that is where a fall stops being a stumble. Level 2 answers the 6 m question with a rest platform. Level 3 answers the 10 m ceiling by splitting flights. The US path runs its own clock — cages required over 24 ft by OSHA 1910.28, an exemption dated 2036-11-18, and a 2025-09 proposal to change it that is still undecided. Map your climb to the tier table, and the RFQ checklist above fills itself in.
| Safety Level | Climb It Covers | Protection Package | Standard Anchor | Budget Lines |
|---|---|---|---|---|
| Level 0 — plain climb | under 3 m, low consequence | fixed ladder, Φ20 rungs, no cage | EN / AS cage threshold not reached; OSHA 24 ft not reached | ladder only |
| Level 1 — caged climb | 3 m and above | cage from 2.2 m, Φ700 mm barrel, hoops 40×5 @ 1500 | EN ISO 14122-4 and AS 1657 at 3 m; OSHA at 24 ft | cage included in the ladder line |
| Level 2 — caged with rest | 6 m and above | Level 1 plus intermediate platform | EN platform interval 6 m | platform $150–400 |
| Level 3 — system climb | 10 m and above, roof or tank head | platforms at intervals, gate at the head, guard where public access exists | EN flight ceiling 10 m; OSHA head rules | platforms + gate $60–180, one file |
Every tier ships with the same evidence: DoC to the governing standard, MTC 3.1, engineer-signed calcs and trial-assembly photographs — because the level of protection you bought should be as documented as the level you needed.
Tier Decisions, Plainly
Choose the Level When… and the Four Ways Buyers Land on the Wrong One
Buying one tier too low is a compliance finding; one tier too high is budget spent against no threshold. Both are spec errors, and both are avoidable with the two tables below.
| Your Climb Reads… | Choose | The Line That Decides It |
|---|---|---|
| 2.4 m hop to a plant room, EN or AS site | Level 0 plus a gate | cage threshold is 3 m; the roof edge is the real risk |
| 4.5 m silo climb, weekly operator route | Level 1 | over the 3 m line, under the platform line |
| 8 m tank with head work | Level 2 | 6 m platform interval reached; fatigue is a hazard class |
| 12 m chimney or roof riser | Level 3 | 10 m ceiling passed — flights split, gate at the head |
| US site, over 24 ft | cage for pre-2018 ladders until the 2036 sunset; PFAS/LSS for new installs | the 2036 sunset and 2025-09 proposal change nothing today |
| The Wrong-Tier Purchase | What It Really Costs | The Discipline |
|---|---|---|
| Cage-only at 12 m | non-compliant flight, exhausted climbers, insurer exposure | platforms at 6 m intervals — $150–400 against one incident |
| Level 3 steel around a 2.5 m hop-up | fencing money spent defeating no threshold at all | read the 3 m line first; buy the gate instead |
| Platform without the head gate | a compliant rest into an unguarded edge | gate $60–180, same PO, same key system |
| Specs frozen waiting on the OSHA proposal | project dates slip for a rule with no decision | build to the standing 24 ft regime — cages remain the compliant path |
Feature to Outcome
Five Lines That Make the Safety Level Auditable
Protection you can prove is protection you can keep — each row converts a tier into evidence.
| Feature | Advantage | Your Outcome |
|---|---|---|
| Tier mapped in the quote itself | level stated against height and standard | your safety case and your PO agree, in writing |
| Cage from 2.2 m in a Φ700 mm barrel | fall arrest geometry before the threshold | the first meter of compliance is already built in |
| Platforms and gates priced as lines | $150–400 and $60–180, visible and auditable | protection budgeted, never bundled away |
| One compliance file for the full tier | DoC, MTC 3.1, calcs, photos archived 10 years | the audit ends at one attachment |
| 24 h quote against the RFQ checklist | tier checked by our engineers, free | a second opinion on your safety case before you pay |