LadderCageScaffold Access, Factory Direct
Scaffold Ladder Cage
Scaffold access cage with ladder; project pricing available. Volume pricing on scaffold cage sets. DoC, weld inspection records to ISO 5817 Level C and HDG thickness results with every set.
Years Manufacturing
Countries Exported
Projects Delivered
Quote Response
Scaffold Access Cage Options
Scaffold Access Cage Options
Bolt-on scaffold access cages that fit standard scaffolding setups - built for rental and contracting fleets with project pricing.
Bolt-On Compatibility
Bolt-on scaffold access cage - fits standard scaffolding setups for quick, tool-free field installation.
Volume & Project Pricing
Project and volume pricing on scaffold cage sets for rental fleets, contractors and distributors.
HDG or SS304
Hot-dip galvanized 85-100 μm for outdoor sites, or stainless SS304 for coastal and chemical exposure.
Specifications
Scaffold Ladder Cage Specifications
Engineered parameters for every scaffold access cage, made-to-order with bolt-on mounting to your scaffold setup.
Get My Volume Quote| Specification | Value |
|---|---|
| Rung Diameter | Φ20 mm |
| Rung Spacing | 280 mm (≤300 mm) |
| Clear Width | 500 mm |
| Cage Diameter | Φ700 mm (hoops 40×5 @≤1500, straps 30×3) |
| Cage Start | 2.2 m above floor |
| Load Rating | 1.5 kN per rung |
| Materials | Q235B HDG 85–100 μm / SS304 |
| Mounting | Bolt-on scaffold compatible |
Compliance Docs: DoC & Inspection Records With Every Scaffold Cage
Scaffold Ladder Cage Compliance & Documentation
Every scaffold cage ships with its compliance file - no separate paperwork order, no delay.
- DoC - OSHA 1910.28 & EN ISO 14122-4
Declaration of Conformity to the relevant standard
- Weld Inspection Records
Weld inspection records to ISO 5817 Level C and HDG thickness results with every set
- MTC 3.1 Material Certificate
EN 10204 3.1 for Q235B / SS304
Volume Pricing & Project Orders
Volume Pricing & Project Orders
Buy scaffold cage sets direct from the factory with project pricing and tiered volume discounts. Quotes in 24 hours; production 15-25 working days.
Project Pricing
Quote tied to your scaffold project scope and quantity.
Volume Tiers
Tiered discounts for rental fleets and multi-site contractors.
24h Quote
Itemized volume quote within 24 hours, no obligation.
Get a Scaffold Ladder Cage Quote
Get a Scaffold Ladder Cage Quote
Tell us the scaffold type, quantity and height - our engineers reply within 24 hours with volume pricing and a drawing review.
- Volume pricing for sets
- Free drawing review
- DoC & test reports included
Field Deployment
Where Scaffold Cage Sets Earn Their Keep
A bolt-on cage behaves differently from a welded one: it installs with hand tools, relocates as the scaffold grows, and comes off clean at dismantle — properties that change which projects it suits best. The deployment table matches the four site types we quote most to the way the cage is actually used there. In every scenario the set carries the same compliance documents — DoC to OSHA 1910.28 and EN ISO 14122-4 with test reports — so the paperwork survives the rental cycle and the project archive alike.
HDG Q235B is the standard set; stainless variants serve marine and chemical yards at the usual 1.8x and 2.5x multipliers.
| Site Type | How the Cage Is Used | Why Bolt-On Wins |
|---|---|---|
| High-rise facade works | Relocated lift by lift as the scaffold rises | Re-clamped in minutes, no hot work |
| Industrial turnarounds | Temporary protected access during outages | Installs and removes with hand tools |
| Rental fleets | Stocked set hired out project to project | HDG finish survives repeated handling |
| Marine and chemical yards | Permanent-feel access in corrosive air | SS316 variant at ≈2.5x for salt exposure |
Field Story — a Rental Fleet That Got Tired of Refurbishing Ladders
How One Scaffolding Contractor Turned Cage Sets Into the Best-Returning Asset on the Yard
Rental arithmetic is brutal: an asset must earn across dozens of hires and survive the handling between them. This is the story of a fleet owner who ran the numbers on caged access.
A scaffolding contractor was losing money on ladder access two ways. Clients on facade jobs demanded protected climbing after a site safety review, and the contractor's answer — tying ordinary ladders inside the scaffold bays — failed three client audits in a year because tied ladders are not engineered access. Meanwhile every hire returned ladders with bent rungs, and refurbishment ate the rental margin.
The shift was to factory-built bolt-on cage sets: HDG Q235B steel, hoops and straps sized to standard scaffold geometry, clamped on with hand tools and relocated lift by lift as the scaffold rises. Because the set bolts on, there is no hot work permit, no site welding, no cutting — it moves with the scaffold and comes off clean at dismantle. The HDG finish to ISO 1461 at 85–100 μm survives repeated handling in a way paint never did, and each set carries its own DoC to OSHA 1910.28 and EN ISO 14122-4, which ended the audit conversation with a document instead of an argument.
Ordered as a project lot, the sets crossed the 10-unit tier and priced as fleet stock rather than bespoke steel. The contractor now quotes protected access as a line item clients accept, the refurb bay sees the sets twice a year instead of monthly, and the compliance file per set travels with the hire paperwork.
| Fleet Problem | What the Cage Set Changed |
|---|---|
| Tied ladders failing client audits | engineered bolt-on access with its own DoC per set |
| Refurb after every hire | HDG 85–100 μm survives handling paint cannot |
| Hot work permits for site welding | clamped assembly, hand tools only |
| Access stuck at one lift | set relocates as the scaffold rises |
| Bespoke pricing per project | fleet-lot ordering crosses the 10-unit tier |
Scaffold Access, Four Ways Up
Bolt-On Cage Set, Internal Stair Unit, Tied Ladder, or Hoist — the Contractor's Cutoffs
Every scaffolding contractor owns the same four options. Choosing by project type — not by habit — is what separates fleets that pass audits from fleets that argue with them.
| Choose | When the Project Looks Like This |
|---|---|
| Bolt-on cage set | the scaffold grows lift by lift and the cage must move with it — clamped, hot-work-free access with its own DoC that satisfies client safety reviews |
| Internal scaffold stair unit | materials and multiple trades move constantly — stairs carry loads a cage cannot, at more steel and more hire cost per week |
| Tied ladder | short, temporary access for a two-person inspection only — cheap, but not engineered access, and increasingly the first thing auditors write up |
| Material hoist plus caged personnel access | the job is tall enough that climbing time costs production — hoist for materials, cage set for people, each doing its own job |
Fleet mistakes with scaffold access
- Treating tied ladders as compliant access — an engineered cage set with a DoC answers the auditor; a rope-tied ladder answers to nobody
- Site-welding cages to save purchase cost — hot work permits, welder hours and rework erase the saving; clamped sets install in minutes
- Buying painted sets for rental duty — hire fleets handle steel roughly; HDG to ISO 1461 is the finish that survives the yard
- Ordering per project instead of as fleet stock — cage sets bought as a lot cross the 10-unit tier and price as an asset, not an expense
Fleet Features, Hire-Deck Results
Five Things a Factory Cage Set Does for the Fleet That Owns It
Each row is a feature of the set as it leaves the factory — and the result it produces on the hire deck, week after week.
| Feature | Advantage | Your Outcome |
|---|---|---|
| Clamped, hand-tool assembly | no welding, no hot work permits on site | the set installs in minutes and moves with the scaffold |
| HDG 85–100 μm per ISO 1461 | kettle zinc built for repeated handling | refurb visits drop from monthly to seasonal |
| DoC per set — OSHA 1910.28, EN ISO 14122-4 | compliance travels with the hire | client safety reviews close on a document |
| Fleet-lot pricing past 10 units | sets bought as stock, tiered as assets | protected access becomes a profitable hire line |
| Stainless variants at 1.8× and 2.5× | SS304 and SS316 for marine and chemical yards | one supplier covers every yard your fleet serves |