LadderCageExact-Fit OEM Spec Replacement Parts
Cage Ladder Replacement Parts
Exact-fit cage ladder replacement parts - hoops, gates, rungs, brackets, OEM spec. Built to OSHA 1917.118; certs & material reports included; 24-hour factory quote.
Years Manufacturing
Countries Exported
Projects Delivered
Quote Response
Cage Ladder Spare Parts - Hoops, Gates, Rungs, Brackets
Cage Ladder Replacement Parts
Standardised, part-numbered spares built to original OEM spec - exact-fit for existing cage ladders, in galvanized or SS304.
Hoops
40×5 mm flat bar hoops at 1500 mm spacing for Φ700 cages. Exact-fit replacement hoops.
Safety Gates
Self-closing swing or sliding gates to replace damaged or missing entry gates.
Rungs
Φ20 mm round rungs at 280 mm spacing - knurled or plain, HDG or SS304.
Brackets
8 mm wall and standoff brackets at 1800 mm spacing for secure re-mounting.
Exact-Fit OEM Spec
OEM-Spec Replacement Parts
Replacement parts are matched to the original specification - same material, same profile, same hole pattern. No re-engineering on site.
- Part-number match
Send your part number for an exact match to the original spec
- Photo / dimension match
No part number? Send a photo and dimensions
- HDG or SS304
Match the existing finish of your ladder system
Compliance Docs: Certs & Material Reports
OSHA 1917.118 Compliance - Certs & Material Reports
Replacement parts are built to OSHA 1917.118 original-spec requirements. Certs and material reports ship with every order.
- Original-spec parts
Built to OSHA 1917.118 for existing cage ladder systems
- Material reports
EN 10204 3.1 material reports for HDG / SS304
- Replacement guidance
Notes on fall-protection triggers when replacing cage parts
Part Number Quotes & Volume Pricing
Part Number Quotes & Volume Pricing
Send your part number for a 24-hour factory quote. Standard spares ship in 15-25 working days; non-standard parts are confirmed case by case in your quote.
24-Hour Factory Quote
Send your part number - quote within 24 hours, matched to OEM spec.
Save on Spare Orders
Volume pricing on spare part orders for facility managers and distributors.
Clear Lead Time
Standard parts ship in 15-25 working days; non-standard confirmed case by case, shown on your quote.
Get a Replacement Parts Quote
Get a Replacement Parts Quote
We'll match your part number and quote within 24 hours. Tell us the part, quantity and finish.
- Part-number exact-fit match
- OSHA 1917.118 certs & material reports
- Volume discounts on spare orders
Identification Workflow
The Part Identification Checklist
The difference between a one-week and a four-week spares order is usually the quality of the information sent with the first email. Because our engineers match replacements against OEM geometry — not a generic catalogue photo — the checklist below tells you exactly what to capture before requesting a quote. A magnet is genuinely useful equipment here: it separates stainless from carbon steel in seconds and settles the finish question, which alone moves the price by a factor of 1.8x or 2.5x.
Complete submissions are answered within 24 hours with a drawing for your confirmation — nothing enters production until you have approved the geometry.
| Send Us | Why It Matters | Example |
|---|---|---|
| Photo with a tape measure | Sets overall dimensions unambiguously | Hoop shown at Φ700 mm bore |
| Part number or stamping | Links straight to the OEM drawing | Cast mark on a dock-ladder trestle |
| Magnet test result | Distinguishes SS304/SS316 from carbon steel | No pull — stainless, quote 1.8–2.5x |
| Quantity and site count | Unlocks volume tiers at 10 and 50+ pieces | 40 rungs across 6 ladders |
| Access date if outage-bound | Lets us confirm the 15–25 working-day slot | Shutdown starting the 14th |
Replacement Part File — Failure Modes and Replace-On Evidence
What Fails First, How You Know, and the Code That Replaces It
Cage ladders fail politely — parts telegraph their retirement long before the structure does. This file pairs every wear part with its failure signature and the replacement code, so the inspection round ends in an order, not a debate.
| Failure Signature | Diagnosis | Replace With | Band |
|---|---|---|---|
| Gate leaf slows, no longer self-latches | return spring end-of-service | DT-P4-GT gate or spring service set | $60–180 |
| Strap bent outward or missing after impact | containment surface compromised | DT-P3-ST strap by code | quoted per piece |
| Hoop out of plane, sighted from below | hoop has carried a load event | DT-P2-HP hoop, plus fastener set | quoted per piece |
| Rung corrosion at weld line, boot feels it | section loss at the highest-stress point | DT-P1-RG rung section | quoted per piece |
| Platform walks under foot, bolts loose | fixing failure, not deck failure | DT-P7-FX bracket and bolt set | quoted per set |
| Red rust streaks from bolt lines | field-drilled holes, no zinc | DT-P7-FX fasteners, hot-dip line | quoted per set |
Replacement rules that keep the file honest
- Replace on evidence, not calendar — the signatures above are the evidence; a part with none of them stays in service regardless of age
- Never straighten yielded steel — a bent rung, hoop or bracket has already done its plastic duty; replacement by code is the only repair
- Match the parent metal — stainless parts on HDG parents corrode the parent; the code table keeps the pairs straight
- Photograph before and after — replacement parts ship with the same MTC-traceable paperwork as new ladders, and your photo pair closes the inspection note
- Keep one service set per five climbs — gates and fasteners are the movers; a stocked set turns findings into same-week fixes
Replacement Features, Uptime Results
Five Things Factory Replacement Parts Do for the Aging Climb
A ladder with a parts plan never leaves service for long — the five features below are how that plan works in practice.
| Feature | Advantage | Your Outcome |
|---|---|---|
| Failure-signature part file | diagnosis to code in one step | inspection findings convert to orders the same day |
| 10-year drawing archive | your ladder's geometry on file | parts quote in hours without a site survey |
| Open price bands by part | $60–180 gates, $90–250 exits, $150–400 platforms | budget lines exist before the failure does |
| MOQ 1 with full QC chain | single parts, certificates included | one strap arrives as traceable as a hundred |
| Metal-matched codes | HDG, SS304, SS316 parts by parent | no galvanic surprises on the repaired climb |