LadderCageFactory-Direct Caged Ladder With Platform
Caged Ladder With Platform
Cage ladder with platform - welded steel, custom heights, cage and platform one system. Free drawing review; OSHA & EN ISO 14122-4 compliant.
Projects Delivered
Countries Exported
Quote Response
Max Single-Run Height
Caged Ladder With Platform - One System, Custom Heights
Caged Ladder With Platform
Cage and Platform One System
The cage, ladder and platform are fabricated and shipped as one kit - no field-fit surprises, one set of drawings.
Welded Steel - HDG or SS304
Q235B with HDG 85-100 um per ISO 1461, or PMI-tested SS304/SS316 for chemical and marine environments.
Custom Heights & Platform Positions
Any height up to 25 m single-run; rest platforms positioned to your drawings for multi-run systems.
Specifications
Cage Ladder With Platform - One System & Specifications
Every caged ladder with platform is made-to-order with the engineered parameters below. Platforms are welded steel and located exactly where your project needs them.
Get My Platform Quote| Specification | Value |
|---|---|
| Rung Diameter | Φ20 mm |
| Rung Spacing | 280 mm (≤300 mm) |
| Clear Width | 500 mm |
| Cage Diameter | Φ700 mm (hoops 40×5 @≤1500, straps 30×3) |
| Cage Start | 2.2 m above floor |
| Platform | Welded steel rest platform, position to drawing |
| Load Rating | 1.5 kN per rung |
| Standards | OSHA 1910.28 · EN ISO 14122-4 |
Compliance Docs: DoC & Structural Drawings With Every Order
Compliance - DoC & Structural Drawings
No chasing paperwork after delivery - every caged ladder with platform ships with its full compliance file.
- DoC - OSHA 1910.28 & EN ISO 14122-4
Declaration of Conformity to the relevant standard
- Structural Drawings
Engineer-signed platform and cage layout for project loads
- MTC 3.1 Material Certificate
EN 10204 3.1 for Q235B / SS304 / SS316
Factory-Direct Pricing
Free Drawing Review & 24h Quote
Buy the ladder, cage and platform as one factory-direct system. Itemized quote in 24 hours with a free drawing review.
Free Drawing Review
We review your drawings and confirm platform position and cage layout before you commit.
Quick Quote in 24h
Itemized, line-by-line pricing within one working day - no hidden fees.
Factory-Direct Price
One kit, one factory. Distributor markups are typically 2-3x on cage ladder systems.
Get a Cage Platform Quote
Get a Cage Platform Quote
Free quote in 24 hours + free drawing review and compliance kit with every order. Tell us your height and platform specs - we handle the rest.
- 24h itemized quote
- Free drawing review
- DoC & structural drawings included
- Cage and platform as one system
Field Story — Biomass Plant, Fujian
A Platform at the Valve, Not the Midpoint
A plant manager describes the feed-silo access where the platform position was the whole design — the standard said 9.5 m, the valve said 7.8 m. The build card is that silo.
Before — the diverter valve nobody could reach properly
The feed silo's diverter valve and density meter sit at 7.8 m, two meters below where a textbook ladder platform would go. Maintenance reached them by ladder with one hand on a rung and a torque wrench in the other — every service a balancing act, twice a month. The plant had a ladder problem on paper and a work-position problem in reality, and the two were not the same height.
During — one kit, platform drawn to the work
We drew the climb as one integrated kit: caged ladder to a 1.0 × 1.2 m work platform at exactly 7.8 m, guardrails and a self-closing gate, ladder continuing above to the roof hatch at 10.6 m. Because the climb passes 6 m under EN ISO 14122-4, the platform satisfies the rest-platform rule at the same time as it puts a floor under the valve. Cage from 2.2 m both below and above the deck, hoops Φ700 at 1500, rungs Φ20 at 280. The platform arrived bolted into the cage geometry — one system, one trial assembly, one photo file — and the $260 platform was a visible line on the quote.
After — valve service became a standing job
The torque wrench now works with two hands behind a guardrail, and service time dropped from forty strained minutes to twelve calm ones. The density meter gets checked weekly instead of quarterly because the check is trivial. One compliance folder covers ladder, cage and platform together — the inspector read one drawing and closed the item.
| Build Card — 10.6 m Feed Silo | As Built | Why It Was Specified |
|---|---|---|
| Platform | 1.0 × 1.2 m at 7.8 m — the valve level | the work position decided, not the midpoint |
| Rule fit | satisfies the 6 m rest-platform clause | one deck solves compliance and ergonomics |
| Climb continues | caged ladder above deck to 10.6 m hatch | cage restarts at 2.2 m over the platform |
| Integration | one kit, one trial assembly, one file | no site-built interface, no orphan hardware |
| Price line | platform $260, visible on the quote | the option is auditable, never bundled |
Platform or No Platform — the Honest Trade
Caged Ladder With Platform vs Plain Caged Ladder vs Stair
The Fujian build needed a platform twice — for the rule and for the valve. Not every climb does. This is the decision in the order it should be run.
| Decision Factor | With Platform | Plain Caged Ladder | Stair |
|---|---|---|---|
| Standards trigger | required over 6 m EN / staged practice OSHA | compliant under the trigger heights | outside ladder rules entirely |
| Work at intermediate levels | standing, guarded, two hands | one hand on a rung | standing on treads |
| Climb recovery | deck every 6 m breaks the effort | one continuous pull | easiest of the three |
| Added cost | $150–400 per platform, visible line | the baseline unit | several times the ladder |
| Footprint | platform adds ~1 m² at level | cage circle only | the largest by far |
| Future flexibility | platform position drawn to your work | add a platform later = re-design | fixed geometry |
- Choose the platform when the climb passes 6 m, when work happens at an intermediate level, or when a valve decides the height for you — three triggers, one $150–400 line.
- Choose the plain caged ladder under the trigger heights with top-only access — the platform would be steel bought for symmetry, not for work.
- Choose the stair only when cargo volume justifies the footprint — a platformed caged ladder covers 90% of stair use cases at a fraction of the steel.
Feature → Advantage → Your Outcome
What an Integrated Platform Buys the Service Crew
Five lines from the feed-silo drawing, translated into what the plant measured after month one.
| Feature | Advantage | Your Outcome |
|---|---|---|
| Platform drawn to the work level | floor appears where the valve lives | torque wrench works two-handed at 7.8 m |
| One kit — ladder, cage, platform | geometry interfaces pre-fitted | no site fabrication, no orphan bolts |
| Guardrail + self-closing gate | edge closed automatically behind work | service stops being a permit conversation |
| Cage restart above the deck | containment never breaks | the climb to the hatch feels like the climb from the ground |
| Platform priced as a visible line | $150–400, never bundled | you can audit exactly what the deck cost you |
Caged Ladder With Platform FAQ
Related Pages
All Cage Ladders
Browse by type, material & application
Cage Ladder With Side Step
Left or right exit at no extra cost
Walk-Through Cage Ladder
Flared bottom, easy entry
Galvanized Cage Ladder
HDG ISO 1461, 85-100 um
Stainless Steel Cage Ladder
SS304/316, PMI-tested
Standards Hub
OSHA, EN ISO, BS, AS requirements