LadderCageCustom Heights Beyond Standard SKUs
Steel Ladder With Safety Cage
Steel ladder with cage - flared entry, 337 lb rated, galvanized option. Custom heights to 25 m single-run; OSHA 1910.28 & EN ISO 14122-4; structural calc report included.
Years Manufacturing
Countries Exported
Projects Delivered
Max Single Run
Steel Ladder With Cage - Options
Steel Ladder With Cage - Options
Flared entry, 337 lb rated rungs and a galvanized or stainless option - built as a fully custom steel ladder with safety cage.
Flared Entry
Flared / flared splay entry improves side-step safety at the base of the climb.
337 lb Rated
Rungs rated to 1.5 kN (≈337 lbs), welded from Q235B steel.
Galvanized or SS304
Q235B hot-dip galvanized 85-100 μm for outdoor, or stainless SS304 for chemical and coastal sites.
Custom Heights
Fixed Steel Ladder With Cage - Custom Heights
Custom heights to 25 m single-run - no standard SKU limit. If your climb is taller than the catalogue, we engineer it to your drawing.
- To 25 m single-run - Fully Custom
No standard SKU ceiling - heights engineered to your structure
- Single-Run to 25 m
One continuous climb with no intermediate break
- Multi-Run with Rest Platforms
Rest platforms and transitions for climbs beyond 25 m
Specifications & Compliance
Steel Ladder With Safety Cage Specifications & Compliance
Made-to-order with the engineered parameters below and the full compliance file included.
- Structural Calc Report
Engineer-signed for your custom climb height
- DoC & MTC
OSHA 1910.28 / EN ISO 14122-4 DoC plus MTC 3.1 material certificate
| Specification | Value |
|---|---|
| Rung Diameter | Φ20 mm |
| Rung Spacing | 280 mm (≤300 mm) |
| Clear Width | 500 mm |
| Cage Diameter | Φ700 mm (hoops 40×5 @≤1500, straps 30×3) |
| Cage Start | 2.2 m above floor |
| Load Rating | 1.5 kN (≈337 lb) per rung |
| Entrance | Flared / flared splay entry |
| Materials | Q235B HDG 85–100 μm / SS304 |
Factory-Direct Steel Pricing
Factory-Direct Steel Pricing & 24h Quote
Custom heights to 25 m single-run at factory price, with a free drawing review and quote in 24 hours. Production typically takes 15-25 working days.
Factory Direct
No distributor markup on custom steel ladders with cage.
Free Drawing Review
Your custom-height drawings reviewed by our engineers.
24h Quote
Itemized steel quote with calc scope within 24 hours.
Get a Steel Ladder With Cage Quote
Get a Steel Ladder With Cage Quote
Tell us the height, material and access point - our engineers reply within 24 hours with calc scope, drawing review and a quote.
- 24h itemized quote
- Free drawing review
- Calc report, DoC & MTC included
Grade Selection
Steel Cage Ladder — Grade and Coating Selector
Every steel ladder with safety cage shares the same structure — Φ20 mm rungs at 280 mm centres rated 1.5 kN each, 500 mm clear width, Φ700 mm cage from 40×5 hoops at 1500 mm with 30×3 straps. What you select is the metallurgy. The selector below prices the three routes against the galvanized baseline so procurement can shortlist before requesting the 24-hour itemized quote.
| Option | List vs HDG | Best Duty |
|---|---|---|
| Q235B hot-dip galvanized | Base — $95/m ex-works | General industrial, dry or inland sites |
| SS304 stainless | 1.8x | Food, washdown, mild chemical splash |
| SS316 stainless | 2.5x | Coastal, effluent, chloride-heavy service |
| HDG with trial assembly | Base — all orders | Fit-up verified, photos archived 10 years |
Field Story — a Substation Where Every Document Gets Audited Twice
The Steel Ladder With Cage That Passed a Grid Operator's Vendor Audit First Pass
Utility buyers do not just receive a ladder — they receive a documentation package that outlives the project team. This is what that package looks like when it arrives complete.
A regional grid operator tendered steel ladders with cage for three transformer bays — 5 m, 6 m and 8 m climbs at an inland site. The technical pass-through was simple; the vendor audit was not. Every supplier had to show material traceability, weld certification, coating compliance and a repeatable QC chain before the commercial envelope was even opened.
Our file answered the audit point by point, because it is the same chain we run on every order: MTC 3.1 on the Q235B heats, welds certified to ISO 5817 level C, hot-dip galvanizing to ISO 1461 measured at 85–100 μm, factory trial assembly, and staged photographs from raw material to container loading — retained for 10 years. Three ladders, three climbs, one geometry: rungs Φ20 at 280 mm, clear width 500 mm, cage Φ700 mm from 2.2 m, hoops 40×5 at 1500 mm with 30×3 straps.
The order priced at the $95/m HDG factory rate — all three climbs for less than the bottom of the US catalog range for a single unit — and shipped inside the 15–25 day production window. The operator's QA lead later said the quiet part out loud: the ladder was ordinary good steel; the file was what won it.
| Audit Question | What Satisfied It |
|---|---|
| Material provenance | MTC 3.1 per heat — Q235B chemistry traceable to the mill |
| Weld integrity | ISO 5817 level C certification on every cage joint |
| Corrosion budget | ISO 1461 HDG measured at 85–100 μm |
| Fit at site | factory trial assembly, bolt pattern photographed |
| Evidence retention | five-stage QC photo record kept on file for 10 years |
Utility-Grade, Translated
Five Features of Our Steel Ladder With Cage — Written as Asset Results
Utility and industrial buyers think in asset decades, not delivery weeks. Each feature below is stated as the outcome your register records.
| Feature | Advantage | Your Outcome |
|---|---|---|
| Five-stage QC chain | MTC 3.1 → weld cert → coating → trial assembly → photo record | vendor audits pass first pass, no chase documents |
| DoC to OSHA 1910.28 and EN ISO 14122-4 | both regimes named on one declaration | one ladder satisfies US and European inspection logic |
| One geometry across all climbs | same rung, width, cage and bolt pattern | line crews train once and install anywhere on the estate |
| $95/m HDG factory rate | all three climbs under one catalog unit's price | budget goes to bays and steel, not to markup |
| 10-year document retention | photos and certificates on file at the factory | an audit five years later is an email, not a project |
Steel Ladder With Safety Cage FAQ
Related Steel Ladder With Cage Pages
All Cage Ladders
Browse by type, material & application
Carbon Steel Cage Ladder
Q235B / Q345B, MTC & DoC
Fixed Ladder with Cage
Permanently mounted caged access
Galvanized Cage Ladder
HDG ISO 1461, 85–100 μm
Stainless Steel Cage Ladder
SS304/316, PMI-tested
Standards Hub
OSHA, EN ISO, BS, AS requirements